Janome 6500 Sewing Machine User Manual


 
65
Custom stitch adjustment (Mode 2 and 3 only)
The stitch width and length can be individually altered for
each pattern in the programmed combination.
Example: To alter the stitch width and length of a single
pattern in the combination
Press the Edit button to shift the cursor under the pattern
you wish to alter.
Press the stitch width adjusting button to reduce the width
to “5.0”.
Press the stitch length adjusting button to reduce the length
to “1.5”.
NOTES:
To view the stitch setting of each pattern, shift the cursor
under the desired pattern then press the stitch width or
length adjusting button. The settings will be displayed at
the bottom center of the LCD screen.
If you press the stitch width or length adjusting button when
the cursor is on the right of the last programmed pattern, a
custom adjustment will be canceled and uniform
adjustment will be applied.
Storing and recalling the pattern combination
A pattern combination will be kept in the memory for future
use even after turning the machine off.
The stored pattern combination can be recalled by pressing
the memory/recall button.
NOTES:
If you store a new pattern combination, the previously
stored combination will be deleted.
One pattern combination can be stored in each mode.
To store a pattern combination
Program a pattern combination.
Press the memory/recall button. An hourglass will appear
for a while and the pattern combination will be stored.
Turn the machine off.
1 Stored Pattern Combination
To recall the stored pattern combination
Turn the machine on.
Select the mode in which you have stored the pattern
combination.
Press the memory/recall button and the stored combination
will appear on the LCD screen.
2Recalled Pattern Combination
1
2