Filter
Top Products
12
Winding the Bobbin
Removing the bobbin
Slide the hook cover plate release button to the right,
and remove the hook cover plate.
Lift out the bobbin from the bobbin holder.
1 Hook Cover Plate Release Button
2 Hook Cover Plate
3 Bobbin
NOTES:
Avoid using a bobbin when it begins to empty since it
may cause thread bunching.
Always use the correct bobbin. Using a wrong bobbin
may cause malfunctions.
Setting the spool of thread
Place the spool of thread on the spool pin with the
thread coming off the spool as shown. Attach the
spool holder, and press it firmly against the spool of
thread.
1 Spool of Thread
2 Spool Pin
3 Spool Holder
NOTES:
Avoid using a paper spool when it begins to empty
since it will not unwind smoothly. It may cause the
thread to bunch or slip when using the auto thread
cutter.
Use the large spool holder for ordinary spools, while
the small spool holder for small spools.
4 Small Spool
5 Small Spool Holder
1
2
3
1
2
3
3
1
4
4
5
5