Filter
Top Products
39
Quilting bar for the zigzag foot
Machine Setting
Pattern: 01 (Mode 1)
Thread tension:2-6
Presser foot: Zigzag foot A
Foot pressure: 2
Reduce the foot pressure to “2” for better maneuverability
of bulky material.
To attach
Loosen the screw on the back of the foot holder.
Insert the quilting bar into the opening and slide the
quilting bar to set the width at the space of the seams you
desire.
Tighten the screw.
1 Screw
2 Opening on the Foot Holder
3 Quilting Bar
4Space of the Seams
To sew
Sew while tracing the previous seam with the quilting bar.
Freemotion quilting
Machine Setting
Pattern: 11 (Mode 2)
Thread tension:2-6
Presser foot: Darning foot P-2
Foot pressure: 1
Feed dog: Dropped
Attach the darning/embroidery foot P-2 (refer to page 29
for how to attach it).
Baste or pin the quilt layers. Draw a quilt design on the
top fabric with a washable maker.
Move the quilt layers slowly and evenly while stitching on
the marked design.
CAUTION:
Do not pull the fabric while stitching. This may deflect the
needle causing it to break.
1
2
3
4