Filter
Top Products
36
Rolled Hem
Machine Setting
Pattern: 01 (Mode 1)
Thread tension:2-6
Presser foot: Rolled hem foot D
Foot pressure: 3
To sew:
Fold the edge of the fabric twice, 6 cm (2 3/8”) in length
and 0.3 cm (1/8”) in width.
Trim the corner 0.5 cm (3/16”) by 0.8 cm (1/4”) for easier
insertion of the hem into the foot.
1Wrong Side of the Fabric
2 0.5 cm (3/16”)
3 0.8 cm (1/4”)
4 Curl of the Foot
Place the fabric aligning the edge of hem with the guide
on the foot.
Lower the foot and sew to 1-2 cm (1/2”-1”) while pulling
both thread to the back.
Stop the machine and lower the needle into the fabric.
Raise the foot and insert the folded portion of the fabric
into the curl of the foot.
Lower the foot, and then sew by lifting up the edge of the
fabric to keep it feeding smoothly and evenly.
1
2
3
4