Honeywell K9696V2 Home Security System User Manual


 
Walk-through
1–3
1.2.3 Other Hardware
Ports for future use
The USB ports, Printer port, VGA2 port, the MIC IN connector and the eight, numbered
RS-232 ports are for future use. Please do not connect USB devices or a printer to a
Multi-Media unit.
For more detail
section 5: Other Site Hardware. p. 5–1
1.2.4 Powering-up the Multi-Media unit
!3 Supplying power to the unit and the cameras
Fig. 3. Consider also plugging in cameras into the uninterruptible power supply used
for a unit.
In Europe, a UPS is required to meet EN50130–4 Euro Norm.
Power switch
The power switch is located on the front of the unit, behind the locking grille, to the left of
the small blue display screen.
1.2.5 Admin and View Software
!4 Locate a personal computer (PC) running Multi software
Figure 4. To install Admin and View software, run the Multi Admin CD-ROM. If
Microsoft patches are needed for your Windows system, consult the Operator Software
Setup Instructions, part #K5401.