Filter
Top Products
— 22 —
HC24EO SERIES STEAMER
SYMPTOMS
Steamer not steaming
Steamer not
steaming properly
Door leaks
Water does not drain
properly
Water foaming
POSSIBLE CAUSES
No main power source.
Door is open.
Power switch in OFF position.
Timer is off.
Needs water.
Excessive scale buildup in the
cavity well.
Not connected to correct voltage.
Damaged door gasket.
Damage to gasket sealing surface.
Blocked or obstructed steam vent.
Unit not level.
Drain clogged.
Cooking seafood without catch
pan.
REMEDY
Check the power source.
Close door.
Set power switch to ON.
Set Timer.
Add water.
Descale the steamer (see
REMOVAL OF LIME SCALE
DEPOSITS).
If voltage is not correct, contact
your Authorized Vulcan Servicer.
Check door gasket for damage.
If adjustment is needed, contact
your Authorized Vulcan Servicer.
Clear steam vent.
See leveling instructions in
the installation section of this
manual.
Unclog drain.
Use a catch pan. Drain and
replace water.
TROUBLESHOOTING