Filter
Top Products
WattMaster WHP Section 3
Programming 3-1
LCD/Keypad Operations
Main Screen
The Water Source Heat Pump System Manager is the operator’s interface to the status
and setpoints of any WattMaster Water Source Heat Pump (WHP) component on your
communications loop. With the System Manager, you can view any temperature or output
condition and change any setpoint to fine tune the operations of the total system. All
keypad operations are simple and straight-forward, utilizing non-cryptic plain English
messages. The System Manager automatically detects the type of unit that has been
selected, and displays the appropriate status and setpoint screens. The attractive plastic
case of the System Manager allows for placement in any area of your building.
The remainder of this document will lead the user through the system menus and keypad
operation.
All user functions are accessed by pressing the Menu button. Once the button is pressed,
the Main User Menu is displayed.