Filter
Top Products
38
Accessories are Available From Your Retail Store
®
E-Z GATE OPENERS
ACCESSORIES
AUTOMATIC
GATE LOCK
Solar Panel (FM121)
The Solar Panel is a 5 watt solar powered battery charger for use with the FM500 & FM502 gate
operator systems. Particularly suited for remote installations, each Solar Panel comes with tubular
steel support, mounting clips, wire connectors, and 8 ft. of low voltage wire (see Low Voltage Wire
for additional wire). The Mighty Mule® control board has clearly labeled terminal connections for
easy installation of the Solar Panel. Installation in some regions of the world will require multiple
solar panels for adequate charging power. Dual gates require a minimum of 10 watts of solar charging
power. (10 watt solar panels are available)
Push Button Control (FM132)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16
gauge multi-stranded, dual conductor low voltage wire (sold separately).
Pin Lock (FM133)
The Pin LocksubstitutesfortheclevispinatthefrontendoftheMightyMule®gateopeners.Helps
prevent theft of the operator from the gate, while allowing quick release of the operator.
Key Chain Two Button Transmitter (FM134)
The Key Chain Mini Transmitter is a miniature version of the Mighty Mule® entry transmitter and
has the same adjustable code settings. (battery is included)
Single Button Transmitter (FM135)
The Mighty Mule® entry transmitter, with adjustable code settings, is standard equipment with all
Mighty Mule® systems. (battery is included)
Digital Keypad (FM137)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can be
programmed to use up to 25 different personal identification number (PIN) codes. Each code is face
programmable with additional security features built in. Wired installations require 16 gauge, low
voltage, multi-stranded, dual conductor, direct burial wire (sold separately). Requires 3 AA batteries
(not included).
Mounting Post (FM100) - In Ground
This black powder coated pedestal is designed to provide convenient access to your keypad, wireless
intercom, or other access control device from your vehicle. With its break down design it is easy to
install and works well in most standard applications. Surface Mount Flanges (F102) and Extensions
(F103) for added height are available.
Mighty Mule®
Vehicle Sensor (FM138)
The Gate Opening Sensor is designed for residential and agricultural applications and is compatible
with most Mighty Mule® automatic gate opener models (see Sensor Box for model compatibility).
The Sensor is an electromagnetic sensor, which offers 'hands free' operation of the Mighty Mule®
Gate Operator with a 12 ft. radius of detection of vehicles in motion.
Automatic Gate Lock Pull-to-Open (FM143)
A MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks automatically
as gates open and close. Used with Mighty Mule® DC swing gate operating systems for maximum
stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft. long.
Ideal for animal enclosures or high wind areas.
1
2
3
4
5
6
7
8
9
0