GTO UL325 SERIES Garage Door Opener User Manual


  Open as PDF
of 43
 
x2
3/8” Bit
5/16” Bit
Drill
Pliers
Level
Clamp
Adjustable
Wrench
Pen
Center
Punch
Hammer
Tape
Measure
Small
Flat Head
Philips Head
Screwdriver
Flat Head
Screwdriver
Wire
Stripper
Hack Saw
3/8”
wrench
7/16”
wrench
• Lowvoltagewirewillbeneededtorunfromthe
transformer to the control box; length depends upon
the distance between the transformer power supply
and the control box. See Power Wire Installation on
page17, and the accessory catalog.
• PVCconduit.
• Ifyourgateismorethan1000'awayfromanac
power source you will need to use at least one
Mighty Mule® 5 watt solar panel to trickle charge
the battery. See the accessory catalog (Do not use
both transformer and solar).
• Ifyouhavethinwalledtubeorpanelgates,see
Recommended Reinforcement Examples in “Quick
Reference Guide” after Step 3 of “Mounting Opener
to Gate” section.
• Dependingonthetypeofgate,ahorizontalcross
member or mounting plate may be needed to mount
the front of the opener and gate bracket to the gate.
See Gate Bracket Mounting Examples in “Quick
Reference Guide” after Step 3 of “Mounting Opener
to Gate” section.
• Surgeprotectionfortransformer.
• Sometypesofinstallationsrequireu-bolts.
• Ifthegateisapush-to-openrefertopage16 in
Installation Manual.
• Additionalwashersorametalplatemaybeneeded
for wooden post.
•Outletinweatherproofcover.
•Strainreliefnutsforaccessorydevices.
•Ifpostismorethan6”,boltslongerthan8”are
needed.
Items Not Included
Before You Begin
Tools Needed
12
 previous next