Filter
Top Products
CLOSE gate and re-attach opener with clevis pin. Check
for level. Clamp securely.
1
6
N
U
O
Z
7
Secure post pivot bracket to post bracket when clearance is OK
(Step 5) in both open and closed positions.
Mark middle of post bracket slots on fence post. Mark middle of
gate bracket slots on gate cross support.
10
9
Remove clamps, post, gate brackets, and opener. Then use a
hammer and center punch to mark hole positions.
Drill holes completely through gate post and gate cross support.
Attach post bracket assembly to fence post. NOTE: Must be
through bolted.
Mounting Push-to-Open Opener to Gate
Push-to-Open Installation
Your Property
17
11
P
S
Y
R
8