GE 6100 Air Conditioner User Manual


 
8
Zoneline
®
Features
Resistance heat Heat pump
AZ
41 Series
AZ
41 Dry Air 25
AZ
61 Series
Cooling EER Range (230 Volts/265 Volts) 10.6 - 12.8 11.3 - 12.2 11.2 - 13.2
Heating COP Range (230 Volts/265 Volts) N/A N/A 3.3 - 4.0
Refrigerant type R-410A R-410A R-410A
Cross-flow (tangential) blower Standard Standard Standard
Enhanced Dehumidification Optional Standard
Heat pump with resistance heat back-up Standard
Heat pump with supplemental resistance heat Standard
Staged Heating 3-Stage***
Universal heaters - UPC** Standard Standard Standard
Tactile touch pad controls with LED Standard Standard Standard
Touch control set-up features Standard Standard Standard
Highly featured microcomputer controls Standard Standard Standard
Electric resistance heat lock-out (above 46°F) Standard
Automatic emergency heat Standard Standard Standard
Heat pump defrost system Reverse cycle
High-Temperature Operation Protection Standard
Quickheatrecovery Standard
Temperature Boost Selectable
Separate Indoor & Outdoor
Motors — Permanently Lubricated
AC AC DC
2-Speed Outdoor Fan Standard Standard Standard
Indoor fan speed settings Hi/Low Hi/Low Hi/Low
Fan Only setting—2-speed Hi/Low Hi/Low Hi/Low
Cool & heat only settings Hi/Low/Auto Hi/Low/Auto Hi/Low/Auto
“SmartFan” Fan Cycle Control Standard Standard Standard
Auto power recovery Standard Standard Standard
Automatic Compressor Restart Delay Standard Standard Standard
Freeze Sentinel
(41F) Standard Standard Standard
Heat Sentinel (85F) Standard Standard Standard
Automatic indoor frost control Standard Standard Standard
Temperature limiting Electronic 7-step Electronic 7-step Electronic 7-step
Solid-state thermostat Standard Standard Standard
Remote thermostat compatibility Standard Standard Standard
Central desk control compatibility Standard Standard Standard
2-position discharge grille 50º/40º Standard Standard Standard
Upfront filter (interchangeable) Standard Standard Standard
3-position manual air vent control Standard Standard Standard
Sleep function Standard Standard Standard
Transfer Fan Connections Standard Standard Standard
Ducted Installation Capability Optional Optional Optional
Corrosion-treated chassis Optional Standard Optional
Internal condensate removal (ICR)* Optional
*Not for use in corrosive environments
**UPC — Universal Power Cord Connection (see pages 42 and 54).
*** Two stage heating if using remote thermostat
265-volt units must be connected in a manner to meet National Electrical Code and all local codes.