Filter
Top Products
2.10 To turn the F40 Avanti off (Touch Pad)
2.10.1
Press the ON / OFF button (A) once and the F40 Avanti will
turn off. See diagram 4.
ENSURE THE APPLIANCE IS COLD BEFORE PROCEEDING.
3.1 The outside casing of the F40 Avanti should be cleaned
using a damp cloth.
3.2 To clean the glass frame, remove the front as detailed in the
installation instructions.
3.3 Remove the glass frame by unscrewing the six pozidrive
screws. See diagram 5.
3.4 To clean the glass surface, Gazco recommends you use a
ceramic glass product generally sold for cleaning ceramic
hobs.
3.5 Ensure that the fibreglass seal on the glass frame is intact.
Replace the six screws working from the top down. Tighten
the screws evenly.
NEVER OPERATE THE APPLIANCE WHEN THE GLASS
PANEL IS REMOVED OR BROKEN.
ADVICE ON HANDLING AND DISPOSAL OF FIRE
CERAMICS
The fuel effect and side panels in this appliance are made
from Refractory Ceramic Fibre (RCF), a material which is
commonly used for this application.
Protective clothing is not required when handling these
articles, but we recommend you follow normal hygiene
rules of not smoking, eating or drinking in the work area
and always wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a
minimum, during installation and servicing a HEPA filtered
vacuum is recommended to remove any dust accumulated
in and around the appliance before and after working on it.
When servicing the appliance it is recommended that the
replaced items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous
waste and may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.
3. CLEANING THE F40 AVANTI
6
USER INSTRUCTIONS
5
AR1454
4
AR1455
C
A
B