Filter
Top Products
57
Instructio
n animation message display
Bobbi
n winding
Th
e bobbin winder is winding the bobbin.
BH lever is not lowered
Th
e buttonhole or darning stitch was selected and press on
th
e foot control while the buttonhole lever is raised.
- When operating correctly: 1 beep
- When the memory is full 30 units of pattern: 2-short beeps
- When operating incorrectly: 3-short beeps
- When the sewing machine is in trouble and can't sew : 8
second
s short beeps.
It means that the thread is twisted or jammed and the hand
whee
l axle can't move. Please look through the "Trouble
shootin
g guide" on page 61/62 to find the solution. After the
proble
m has been solved, the machine will continue to sew.
Warning beeping sound
Please Note:
If the problem is still not solved, please contact your local dealer.
Attention:
Durin
g the sewing, if the thread get jammed inside the hook
stoppin
g the needle from moving and you continue pressing
th
e foot control, the security switch will stop the machine
completel
y. In order to restart the sewing machine, you will
hav
e to turn the on/off switch to the OFF position and then
ON again.
WARNING FUNCTIONS
04
If you press any button on the machine when the bobbin is full or
the bobbin winder is in the right position, then the machine will
beep 3 times as a warning. Return the bobbin winder stopper to
the left position.