Euro-Pro 9136C Sewing Machine User Manual


 
Using the overcasting foot
1. Change the presser foot to the all purpose
foot (T) .
2. Sewing the overcasting along the edge of
the fabric so that the needle drops over
the edge of the fabric on the right side.
Using the all purpose foot
5.0~7.0
2.0~3.0
2.5~4.5
2.0~3.0
Change the presser foot to the overcasting
foot (E).
Sew the fabric with the fabric edge against
the guide of the overcasting foot.
The overcasting foot should be used to sew
with patterns 5 and 8 only and do not set
the stitch width narrower than "5.0". It is
possible that needle could hit the presser
foot and break when sewing other patterns
and width.
Attention:
OVERCASTING STITCHES
30
03