Filter
Top Products
Turn power switch to off ("O") when carrying out any of the
above operations!
(1)
Raise the presser foot bar (a). Attach the presser foot holder (b)
as illustrated.
(2)
Lower the presser foot holder (b) until the cut-out (c) is
directly above the pin (d).
Raise the lever (e).
Lower the presser foot holder (b) and the presser foot (f) will
engage automatically.
(3)
Raise the presser foot.
Raise the lever (e) and the foot will disengages.
(4)
Attach the seam guide (g) in the slot as illustrated. Adjust
according to need for hems, pleats, etc.
Attention:
Attaching the presser foot holder
Attaching the presser foot
Removing the presser foot
Attaching the seam guide
CHANGING THE PRESSER FOOT
b
a
e
b
d
c
f
e
g
23
02