Filter
Top Products
48
03
Remove the presser foot holder, and attach
the darning foot to the presser foot holder
bar. The lever (a) should be behind the
needle clamp screw (b). Press the darning
foot on firmly from behind with your index
finger and tighten the screw (c).
First sew around the edges of the hole (to
secure the threads). Working from left to
right, sew over the hole in a constant and
continuous movement. Turn the work by
1/4 and sew over the first stitching moving
the work slower over the hole to separate
the threads and not form big gaps between
the threads.
Darning
3.5~5.0
a
b
c
FREE MOTION DARNING,
EMBROIDERY AND MONOGRAMMING
Please Note:
Free motion darning is accomplished without
the sewing machine internal feed system.
Movement of the fabric is controlled by the
operator. It is necessary to coordinate sewing
speed and movement of fabric.
Move the drop feed control to " " to lower
the feed dogs.
a
b
b
a
a