Filter
Top Products
9
4.3 VIBRATION ALARM
An internal vibrating motor activates whenever the Audible Alarm sounds. The
Vibration Alarm operates as a secondary alarm feature in high noise environ-
ments where the audible alarm may be difficult to hear.
The Vibration Alarm is reset the same as the Audible Alarm as described in
Section 4.2.
The Vibration Alarm will also pulse briefly whenever the MINI-SA instrument
is turned ON or OFF.
WARNING
THE VIBRATION ALARM DOES NOT FUNCTION FOR THE LOW BAT-
TERY INDICATION.
4.4 ALARM LIGHT
The SCOTT INSTRUMENTS MINI-SA instrument contains a Red Light Alarm
LED (Light Emitting Diode) which flashes whenever any Alarm Condition oc-
curs. It will continue to flash when the Audible Alarm is silenced and will flash
as long as the alarm condition is present. In the LATCHING alarm mode,
selected in the Alarm Setpoint Menu, after an alarm condition has cleared,
the alarm indication will continue until the alarm is acknowledged by de-
pressing a pushbutton. In the NON-LATCHING alarm mode, all alarm indica-
tions clear when the alarm condition clears. In either mode, the instrument
gives an “all clear” signal with three audible beeps, three flashes of the Red
Alarm Light, and three vibration pulses when the alarm indication is cleared.
4.5 STATUS LIGHT
The instrument also has a Green Status LED that flashes periodically, indi-
cating continuing instrument operation.