Filter
Top Products
Rosemount Tank Radar REX
Chapter 10 Mechanical Installation
10-12
Installation Manual
308014EN, Edition 4
May 2013
10.2.6 Mounting the Flange Ball model T38-W
The Flange Ball T38 is welded to the flange.
To mount the T38 do the following:
1 Make sure that the diameter of
the hole is 116 ± 2 mm.
2 Let the protection plates
remain on the Flange Ball until
the welding is finished. These
plates protect the surface of
the Flange Ball from welding
sparks.
3 Make sure that the Flange Ball
is mounted in such a way that
the grove is directed upwards
when the flange is mounted on
the tank nozzle.
11.1b_116mm.eps
Protection plate
Flange Ball
11.2.eps
Groove
11.3_aa.eps