Filter
Top Products
www.desatech.com
112108-01C 25
5. To reinstall burner, follow reverse steps
making sure air shutter on burner tube is
completely seated over orice mount.
6. Replace log set. Close door and latch. Reattach
screen and louvers.
CAUTION: Make certain ori-
air shutter and that air shutter is
CLEANING AND
MAINTENANCE
When lit for the rst time, the appliance may emit a
slight odor for about 16 - 24 hours. This is normal and
is due to the “curing” of the logs and the “burn-in” of
internal paints and lubricants used in the manufactur-
ing process. Keep compartments, logs, burners, and
area surrounding the logs clean by vacuuming or
brushing at least twice a year. Temporary removal
of the log set may ease the cleaning of the burner and
pilot assembly. In cleaning, take care not to alter the
pilot or burner location. Be sure appliance is cool
before each maintenance session.
WARNING: Make certain
bURNER FLAME
ADjUSTMENT
Continued
WARNING: Make certain
WARNING: Children and
-
when they are in the same room
vent system at the start of each
-
tion which may hinder its normal
-
CAUTION
-
GLASS DOOR
Note: Before proceeding, make sure unit is com-
pletely cool.
1. Remove top and bottom louvers and screen
assembly. Undo 4 latches and open glass door.
The procedure is the same for the end louver
panel but the entire frame must be removed
as one assembly.
2. To clean glass door, DO NOT remove glass
from frame. Use any glass cleaner to clean
glass. Do not use abrasive cleaners as this may
damage glass.