Filter
Top Products
Crestron Residential Lighting Design Guide GreenLight Options–CAEN Enclosures
Doc 4775A 43
CLX-Series Lighting Control Modules
Model Load Rating
CLX-1DELV4
Four channels of dimming for
electronic low voltage and
incandescent loads
Each channel is rated for 1200 watts, with a total module rating of 1920
watts when fed from a 20A breaker. A total module rating of 1440 watts
when fed from a 15A breaker
NOTE: CLW series dimmers are not compatible with CLX-1DELV4
CLX-1DIM4
Four channels of dimming for
incandescent, magnetic low voltage,
neon/cold cathode, and dimmable
2-wire fluorescent loads
Each channel is rated for 1920 watts, with a total module rating of 1920
watts when fed from a 20A breaker. A total module rating of 1440 watts
when fed from a 15A breaker
CLX-1DIM8
Eight channels of dimming for
incandescent, magnetic low voltage,
neon/cold cathode, and dimmable
2-wire fluorescent loads
Each channel is rated for 1920 watts, with a total module rating of 1920
watts when fed from a 20A breaker. A total module rating of 1440 watts
when fed from a 15A breaker
CLX-2DIM2
Two independent channels of
dimming for incandescent, magnetic
low voltage, neon/cold cathode, and
dimmable 2-wire fluorescent loads.
Each channel is rated for 1920 watts; with a total module rating of 3840
watts when fed from two separate 20 A feeds, and a total module rating of
2880 watts when fed from two 15A breakers.
CLX-2DIM8
Eight channels of dimming for
incandescent, magnetic low -voltage,
neon/cold cathode, and dimmable
2-wire fluorescent loads, actually
composed of two independent four-
channel dimmers in a single module
Each channel is rated for 1920 watts; with a total module rating of 1920
watts when fed from a 20A breaker. A total module rating of 1440 watts
when fed from a 15A breaker
CLX-1FAN4
Capacitive-type speed control for up
to four ceiling fan motors
Each channel provides four preset speed settings plus off and is rated for 2
amps, with a total module rating of 8 amps
CLX-1MC4
Control of up to four bidirectional
motors for drapes, blinds, projection
screens, lifts, etc.
Each channel is rated for 10 amps or 1/2 HP, with a total module rating of
16 amps.
CLX-4HSW4
Four independent channels of
switching for high-inrush loads such
as motors, HID lighting, and
fluorescent ballasts, as well as
incandescent, low voltage, and
neon/cold cathode lighting
Each channel is rated for 16 amps or 1/2 HP; with a total module rating of
64 amps when fed from four separate 20 amp feeds.