Filter
Top Products
Green Light Power Switching Crestron Commercial Lighting Design Guide
Doc.4775A 26
IPAC-GL1
Integrated Professional Automation
Computer for Green Light Power Switching
Wall mount lighting control processor
Crestron 2-Series control engine
Easy system programming via LCD front panel
7 programmable buttons with LED feedback
Customizable backlit button labels
CEC Title 24 listed
Astronomical time clock
Occupancy sensing and daylight harvesting
2 RS-232, 4 digital/analog input, & 4 relay control ports
Cresnet and 10/100 Ethernet communications
Onboard e-Control
®
Web server
RoomView
®
and SNMP remote management
SSL (Secure Sockets Layer) network protection
Extensively programmable via PC software
3-gang wall-mountable
Available in white or black
The Crestron IPAC is a 2-Series control processor designed
for wall mount installation. Its front panel controls and LCD
display deliver a user-friendly interface for out-of-the-box
system setup. Built-in Ethernet, Cresnet, RS-232, relay, and
sensor inputs provide direct connectivity for interfacing with
all kinds of devices, controls, and networks. The onboard e-
Control
®
Web server allows for complete integration as part
of a facility-wide managed control network.
Out-of-the-Box Lighting Control
—
The GL1 version of IPAC
comes preconfigured for use as the central control processor
for a Green Light Power Switching system. Right out of the
box, the IPAC-GL1 affords easy setup and programming for
a complete switching system consisting of:
Up to 210 switched circuits
16 keypads and 2 touchpanels
30 occupancy sensors and photocells
500 time clock events
Keypads with as many as 12 buttons each can be
programmed easily to control lighting loads and zones. As
well, the seven function buttons on the front panel of the
IPAC-GL1 may also be programmed for lighting control or a
variety of other common functions. Custom backlit labeling
of these buttons is facilitated using an assortment of pre-
printed labels or Crestron Engraver software.
Lights can be programmed to turn on and off automatically
using the built-in astronomical time clock feature. Lighting
events may be programmed to occur at specific times or at
an offset from sunrise or sunset. Occupancy sensors and
photocells may also be implemented to enable automatic
on/off lighting control based on room occupancy and ambient
light levels.
Custom programmability
—
with additional custom
programming, the IPAC-GL1 can support virtually any
functionality imaginable. It works seamlessly with the entire
line of Crestron touchpanels, wireless remotes, lighting
dimmers, shade controllers, thermostats, and more. It can
also interface with third-party devices and systems such as
security and access controls, surveillance cameras, and
HVAC for a fully integrated solution. Contact Crestron Sales
Support Services for more information.
The IPAC-GL1 is designed to be mounted in a standard
3-gang electrical box independent of the lighting panels,
allowing it to be installed wherever it is most advantageous
for the project.