Filter
Top Products
Crestron Commercial Lighting Design Guide Green Light Power Switching
Doc 4775A 21
GLPS-HSW-FT (Continued)
SPECIFICATIONS
Load Ratings
Switch Channels: 8 to 32 depending upon panel size and
options, each channel
phase-independent
Maximum per Channel: 16 Amps @ 100 to 277 Volts AC,
50/60 Hz; 1/2 HP @ 120 Volts, 1 HP @ 277 Volts
Switched Load Types: Incandescent, Magnetic Low-Voltage,
Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent
Lamp Ballast, High-Intensity Discharge, Motors
Dimmed Load Types (special order): 0-10 Volt 4-Wire
Dimmable Fluorescent Ballast
Rated Relay Lifetime: 1,000,000 cycles at full rated electronic
ballast load
Input Power
Line Power: 120 or 277 VAC, 20 Amps maximum per circuit,
50/60 Hz
Cresnet Power Usage (optional): 50 Watts (2.08 Amps @ 24
Volts DC) per panel, use Crestron GLA-PWS50 or equivalent
power supply
Lightning Protection
Can withstand 6 kV / 3 kA surge, as per IEC 61000-4-5 and
ANSI/IEEE C62.41-1991
Enclosure
NEMA Type 1, IP20 rated protection, for indoor use only
Back Box: 16 Gauge galvanized steel, flush or surface wall
mount
Front Cover: 16 Gauge steel, grey powder coat finish
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Dimensions
Small: 23-1/2 x 14-3/8 x 4 in (59.7 x 36.5 x 10.2 cm) HWD
Large: 38-1/4 x 14-3/8 x 4 in (97.2 x 36.5 x 10.2 cm) HWD