Chamberlain 349544 Garage Door Opener User Manual


  Open as PDF
of 48
 
40
PROGRAM A REMOTE CONTROL USING THE LEARN BUTTON
1 Locate the Learn Button. 2 Pressand immediatelyrelease the Learn button. The
Learn LEDwill glowsteadyfor 30 seconds. Within 30
seconds...
LEARN
LED
LEARN
Button
3 Pressand hold the button on the remote control thatyou
wish to use.
Release the button when the garage door opener lights
blinkor two clicksare heard.
“click”
“click”
When replacing the lightlenscover,ensure the antenna wiresare handing straightdown.
To Erase the Memory
ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES
1 Pressand hold the learn button on garage door opener until the learn LED goesout
(approximately 6seconds).All remote control and keylessentrycodesare now erased.
Reprogramanyaccessoryyou wish to use.
ERASE ALL DEVICES (Including MyQ™ enabled accessories)
1 Pressand hold the learn button on garage door opener until the learn LED goesout
(approximately 6seconds).
2 Immediatelypressand hold the learn button again until the learn LEDgoesout.All codesare now
erased.
Reprogramanyaccessoryyou wish to use.
Remote Control
 previous next