Filter
Top Products
38
Smart Control Panel Setup
The featureson the door control can be programmed through a seriesofmenuson the screen and the navigation buttons.Refer to the descriptions below.
SCREEN
The main screen displaysthe time,temperature,and current
battery charge (if applicable).
Navigation Buttons
FEATURES
Pressthe navigation button below "MENU"to view the Featuresmenu.
CLOCKSETUP: Setthe time,choose 12 or 24 hour clock and
show/hide clock.
TTCSETTINGS (for sectional doors ONLY):
Set the Timer-to-Close feature off/on and setthe time interval before
door closes.NOTE: DO NOT enable TTCif operating a one-piece
door.TTCis to be used ONLY with sectional doors.
LOCK: Enable/disable lock.
PROGRAM: Add remote controls,MyQ™ devices, an extra remote
button to control your garage door opener lights,or a keylessentry.
SETTINGS
Pressthe navigation button below the down arrowtill you see
TEMPERATURE to viewthe Settingsmenu.
TEMPERATURE: Displaythe temperature in Fahrenheitor
Celsiusand show/hide the temperature.
LANGUAGE: Select alanguage.(English,French or
Spanish).
LIGHTSETTINGS: Setduration for garage door opener light
to stayon after operation,selectable range of1-1/2 to 4-1/2
minutes.Turn the Motion sensor off/on,and turn the entrylight
feature off/on.
CONTRAST: Adjustthe contrastofthe screen.
To program a remote control or keylessentryto the garage door opener using the door control see page 39.
Door Control