Filter
Top Products
Page 12.5
Adjusting the DeadbandAdjusting the Deadband
Adjust the deadband
for the 1st stage.
(1 - 6 )
2
Setup
I9
For more detailed information, please see the explanation on the
previous page.
Press the HUMIDITY button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
HUMIDITY
Press
Note: Press the MODE
button momentarily
to move through the
setup screens. Press
and hold the MODE
button to move back-
wards through the
setup screens.
12
HUMIDITY
MODE
MODE
Press the MODE button. While holding
the MODE, press the HUMIDITY button
to enter Setup screens.
Press the MODE button repeatedly
until this setup screen appears.