Filter
Top Products
SEWING THE STITCHES
Utility Stitches
73
3
a
Pull out several threads from the fabric to
leave a 3 mm (approx. 1/8 inch) area open.
b
Press , and then attach presser foot “N”.
c
With the surface of the fabric facing up, sew
along the right edge of the open area.
d
Press to create a mirror image of the
stitch.
e
Sew along the left edge of the open area so
that the stitching looks symmetrical.
■ Hemstitching (3) (Drawn Work (2))
a
Pull out several threads from both sides of a 4
mm (approx. 3/16 inch) area left unopened,
as shown in the illustration.
a Pulled out thread
b Pulled out area
c Approximately 4 mm (approx. 3/16 inch) remaining
b
Press .
c
Attach presser foot “N”, and then sew along
the center of the unopened area.
Memo
For best result, use loosely woven fabrics.
Memo
For details on the stitch patterns, refer to the “STITCH
SETTING CHART” at the end of this manual.
N
N
Memo
Drawn work can also be sewn using the wing needle
(sold separately).
Memo
For details on the stitch patterns, refer to the “STITCH
SETTING CHART” at the end of this manual.
a
c
b
N