Filter
Top Products
CARE AND MAINTENANCE
Appendix
177
8
i
Insert the bobbin case so that the projection
on the bobbin case aligns with the spring.
a Projection
b Spring
j
Insert the tabs on the needle plate cover into
the needle plate, and then slide the cover
back into place.
a Needle plate cover
b Tabs
a
b
b
a
Note
• Never use a bobbin case that is scratched;
otherwise, the upper thread may become tangled,
the needle may break, or sewing performance may
suffer.
• For a new bobbin case (part code: XC3153-
151(green marking on the screw) (for sewing and
embroidering with bobbin thread recommended by
Brother) or XC8167-151 (pink marking on the screw)
(for embroidering with bobbin threads from other
manufacturers)), contact your nearest authorized
dealer (see page 131).
• Be sure that the bobbin case is correctly installed.
Otherwise, the needle may break.
a
b