Filter
Top Products
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
13
No. Part Name
Part Code
U.S.A./
Canada
Others
1 Embroidery foot “U” XD0313-051
2 Buttonhole foot “A” X57789-151
3 Overcasting foot “G” XC3098-051
4 Monogramming foot “N” X53840-351
5 Zipper foot “I” X59370-051
6 Zigzag foot “J” (on machine) XC3021-051
7 Blind stitch foot “R” X56409-051
8 Button fitting foot “M” 130489-001
9 Walking foot SA140 F033N:XC2214-102
10 Side cutter foot SA177 F054:XC3879-002
11 Free-motion quilting foot SA129 F005N:XC1948-002
12 Seam ripper X54243-051
13 Bobbin × 4 SA156 SFB:XA5539-151
14 Needle set X58358-051
15 Twin Needle X59296-151
16 Scissors XC1807-121
17 Chalk pen 184944-001
18 Cleaning brush X59476-051
19 Eyelet punch 135793-001
20 Screwdriver (large) X55467-051
21 Screwdriver (small) X55468-051
22 Spool cap (small) 130013-154
23 Spool cap (medium) × 2 X55260-153
24 Spool cap (large) 130012-054
25 Vertical spool pin XC8619-051
26 Spool felt X57045-051
27 Disc-shaped screwdriver XC1074-051
28 Spool net XA5523-050
29
Embroidery frame set (large)
18 cm (H) × 13 cm (W)
(7 inches (H) × 5 inches (W))
SA439/
EF75
EF75:XC8481-052
30
Embroidery frame set
(extra large) 26 cm (H) × 16
cm (W) (10-1/4 inches (H) ×
6-1/4 inches (W))
SA441/
EF81
EF81:XC9763-052
31 Foot controller
XD0501-021 (EU area)
XC8816-021 (other area)
32
Embroidery needle plate
cover
XA9939-051
33 Grid sheet set SA507 GS3:X81277-050
34 Touch pen (stylus) XA9940-051
35 Knee lifter XA6941-052
36 USB cable XD0745-051
37
Alternate bobbin case
(pink marking)
(See page 131)
XC8167-151
38 Embroidery bobbin thread SA-EBT
EBT-CEN:
X81164-001
39 Stabilizer material SA519 BM3:X81175-101
40 Operation Manual XD0550-051
41 Quick Reference Guide XD0556-051
42 Hard case XC9640-051
Memo
(For U.S.A. only)
Foot controller: Model T
This foot controller can be used with this
machine model NV1500D/NV1500.
Memo
•Always use accessories recommended for
this machine.
• The screw for the presser foot holder is
available through your authorized dealer
(part code: XA4813-051).
• This operation manual and the foot
controller can be stored in the machine’s
hard case.