Filter
Top Products
SEWING THE STITCHES
72
Heirloom Stitching
By sewing with the wing needle sold separately, the
needle holes are enlarged, creating a lace-like
decorative stitch.
This stitching is used to decorate tablecloths, hems, and
shirt fronts.
■ Hemstitching (1) (Daisy Stitch)
a
Insert the wing needle (130/705H, size 100/
16).
b
Select a stitch, attach presser foot “N”, and
then start sewing.
* Select a stitch between 3-01 and 3-22.
Drawn Work (1
■ Hemstitching (2) (Drawn Work (1))
Note
For best results, use lightweight to medium weight
homespun fabrics with a slight stretch.
Note
The needle threader cannot be used. Manually pass
the thread through the eye of the needle from the front.
If the needle threader is used, damage to the machine
may result.
CAUTION
• The “Automatic Threading” button cannot be used.
Thread the wing needle by hand, from front to back.
Using the “Automatic Threading” button may result
in damage to the machine.
• A more attractive finish can be obtained if you use a
“130/705H Wing” needle when sewing these
patterns. If using a wing needle and the stitch width
has been set manually, check that the needle will not
touch the presser foot by carefully rotating the
handwheel before starting sewing.
Memo
For details on the stitch patterns, refer to the “STITCH
SETTING CHART” at the end of this manual.