Filter
Top Products
LCD SCREEN
20
Using the Machine Setting Mode Key
Press to change the needle stop position, turn the buzzer on/off, adjust the pattern or screen, and change
other basic machine settings.
a Select whether the needle stops in the raised or
lowered position when the machine is stopped.
b Select whether to use the sewing speed controller or
to adjust the zigzag width (see page 64).
c Make adjustments to the character and decorative
stitch patterns (see page 92).
d Adjust the presser foot height (select the height of the
presser foot when the presser foot is raised) (see
page 41).
e Adjust the presser foot pressure between 1 (weak)
and 4 (strong).
* The higher the number, the higher the pressure will be. Set
the pressure to 3 for normal sewing.
f Select whether “1-01 Straight stitch (Left)” or “1-03
Straight stitch (Middle)” is the utility stitch that is
automatically selected when the machine is turned
on.
* Press to display the next page.
a Select from among 5 embroidery frame displays (see
page 125).
b Select whether the thread color name, thread color
number or sewing time appears for the thread color
display in the embroidery screen (see page 138).
c Select the thread brand available when selecting a
thread color number in the thread color display of the
embroidery screen (see page 138).
* Press to display the next page.
a Adjust the maximum embroidering speed.
b Adjust the thread tension for embroidering.
c Adjust the height of embroidery foot “U” (see page
120).
d Select the units (mm/inch) for displaying distances
and the sizes of embroidery patterns.
e Select the initial screen (Embroidery/Embroidery Edit)
when the embroidery unit is installed.
* Press to display the next page.
c
b
a
e
d
f
a
b
c
a
b
c
e
d