Filter
Top Products
SEWING AN EMBROIDERING PATTERN
Embroidery
135
5
f
Press the “Presser Foot Lifter” button to lower
the presser foot.
g
To return to the point in the pattern where
sewing was stopped, follow steps
c through
f in the next section.
If the Thread Breaks During Sewing
a
Press the “Start/Stop” button to stop the
machine.
b
If the upper thread broke, rethread the
machine. If the bobbin thread broke, follow
the instructions in steps
a through f from
the previous section to reinstall the bobbin.
c
Press .
d
Press , or to move the
needle back 2 or 3 stitches before the point
where the thread broke.
* If you cannot return to the point where the thread
broke, press to select a color and return to
the beginning of that color. Then, press ,
or to move forward slightly before
the point where the thread broke.
a The number of stitches that have already been sewn.
e
Press .
f
Press the “Start/Stop” button to continue
embroidering.
Memo
For best results, return to a point 2 or 3 stitches before
sewing stopped.
a