Filter
Top Products
61
Step 4: To lower the temperature setpoint, press the “Temperature Down” button until the desired temperature
is shown on the water heater display.
Step 5: When the desired setpoint is reached on the water heater display, press the “Set” button to confirm the
new setpoint. “Setpoint” stops flashing in the water heater display.
To Display and Change Temperature Format (˚F/˚C):
To Change Temperature Format in Display from ˚F to ˚C or ˚C to ˚F:
Step 1: While in “Service Mode”, press “Select” button until “˚F/˚C” is shown in the upper right portion of the
water heater display.
SELECT SET
Status
°F
idle
setpoint
Operational
"Setpoint" Stops Flashing
SELECT SET
Status
°F
idle
setpoint
Operational
"Setpoint" Flashes
SELECT SET
Status
idle
Operational
°F °F/C°