Filter
Top Products
Optional Equipment (for qualified installers only) 45
Travis Industries 100-01169_001 4050119
Accent Light Operation
OFF
Turn the dial all the
way counter-clockwise
until it clicks off.
HIGH
The high position
is all the way
clockwise.
LOW
Turn the dial 180°
clockwise until the light
begins to glow.
NOTE : The accent light responds best when turned to high, then turned down to the desired light level.
Bulb Replacement
NOTE : Do not touch the bulb – oil or other residue left on the bulb may lead to premature bulb
failure. Use a cloth or paper towel to handle the bulb.
The accent light must be replaced with 35 Watt 120 Volt T4 Halogen Bulbs (G6.35 Base) – available at
most hardware stores. To replace the bulb, simply remove it from the socket and insert the new bulb
(pin orientation does not matter).