Filter
Top Products
Finalizing the Installation (for qualified installers only) 27
Travis Industries 100-01169_001 4050119
Log Installation (continued)
Place the top twigs in place.
Note how the holes in the
bottom of the twigs fit over the
pins on the logs.
Place the front twigs in place.
They fit on the flat portions of
the burner.
Installing the Rock Wool
The rock wool comes in one clump. Tear off “dime” sized clumps and flatten. Then pull on the wool to
create gauze-like pieces. Place them near some of the burner holes. The wool glows best when very
thin and porous.
NOTE : We recommend using very little rock wool, especially in LP or high-altitude installations.