Filter
Top Products
7
Removing the condensate collector
1. Remove the nuts “L” from each side of front of the
collector (F
IG. 1.17);
2. Remove the nuts “M” from each side of rear of the
collector (F
IG. 1.18);
3. Release the condesate trap union “N” (FIG. 1.19);
4. Separate the collector from the combustion
chamber(F
IG. 1.20);
5. Remove the condensate collector (FIG. 1.21).
FIG. 1.17
L
FIG. 1.18
M
FIG. 1.19
FIG. 1.20
FIG. 1.21
N