Filter
Top Products
NetworkAIR ACPA400024
Device settings
Path: Main Menu > Setup > System > Device.
Temperature Units. Set the units of measure for temperature readings and settings.
Start Delay. Set the delay between equipment start and when cooling begins.
This delay is in addition to the start-up delay described in “Turn on the equipment” on
page 17.
Resetting to default settings
Path: Main Menu > Setup > Factory Defaults.
Reset to factory defaults. Resetting to factory defaults returns display options to their factory
settings. It does not affect the mode, setpoints, deadband, time, date, run hour meters, or password
settings.
User-defined product data
Path: Main Menu > Setup > Product Data.
The Product Data menu option provides a place to store information about the display interface. Enter
the equipment name, the physical address of the equipment, and emergency or service contact
information.