Filter
Top Products
21NetworkAIR ACPA4000
Operating schedules
Path: Main Menu > Setup > Operating Schedule. Program up to eight sets of environmental
controls that run according to the time and day.
Scheduling: on/off. Select Off to use the default schedule, or On to use the programmed schedules.
Reset schedules. Turn all schedules off and reset them to their factory default settings.
Edit schedules. Set the cooling options for up to eight time periods.
Note: If schedules overlap, the schedule with the highest day-priority runs. The priority is:
• Highest: Sun, Mon, Tue, Wed, Thu, Fri, Sat
• Next Highest: Weekdays, Weekends
• Lowest: Every Day
Schedule: 1 of 8 Select a schedule to modify.
Schedule: On/Off Activate or deactivate this schedule.
Mode Choose Cool, Vent Only, or System Off. See “Mode” on page 20.
Set Point Set the target temperature for the room. See “Set Point” on
page 20.
Blower Set the speed of the blower to High or Low. Use the Low blower
speed to remove humidity from the room air.
Day Choose the days for this schedule to run. Options include: Every
day, Weekdays, Weekends, Sun, Mon, Tue, Wed, Thu, Fri, and
Sat.
Start Time Set the time when this schedule becomes active. Times are entered
using a 24-hour clock.
Stop Time Set the time when this schedule becomes inactive. Times are
entered using a 24-hour clock.