Filter
Top Products
NetworkAIR ACPA400010
Assemble the ducts
1. Thread the duct collars counterclockwise onto each of
the ducts until they bottom out.
2. Install each hose so that the leading edge of the
compressed section of the hose matches air direction
flow.
3. Slide the duct collar of each hose
over the ceiling adapter sleeves and
turn the duct collar to lock in place.
4. Slide the duct collars on the other
end of the ducts over the condenser flanges
and turn to lock in place.
na0312a
Note: The hoses used are directional and
reduce airflow if not properly installed.
Expand the length of hose to fit the required
space.
na1235a
Air Flow
na0317a
Note: Connect the air
diverter side of the ceiling
adapter to the exhaust
hose.
na0150b
na0150b
na0150b
na0150b