Filter
Top Products
19NetworkAIR ACPA4000
Change settings
To change a setting, use the up or down arrow keys to move the selector arrow to the setting and press
the
ENTER key.
List of choices. If the setting is a list of choices, an input arrow is displayed next to the setting. Press
the up or down arrow key to make your selection. Press the
ENTER keys to save the setting and exit from
input mode. Press the
ESC key to exit without saving.
Numbers or text fields. If the setting is a number or text field, use the arrow keys to select the value
for the first character and press the
ENTER key to move to the next character position. Repeat this
procedure to select and set each character. After the last character is set, press the
ENTER key to save the
setting and exit from input mode. Press the
ESC key to exit without saving.
Password entry
To change any setting, you are prompted to enter your password. The default password is APC. To enter
each character or digit of the password, use the up and down arrow keys to scroll to the character and
press the
ENTER key. The cursor moves to the next position. After entering the last character of the
password, press the
ENTER key again to submit the password.
Note: Passwords are case-sensitive.
Turn off the equipment
Path: Main Menu > On/Off.
To shut off the equipment, select the On/Off option on the main menu and change the setting to Off.
Note: Change the setting to Off to shut down the cool mode and the blower fan. The display
continues to receive power.