Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Testing Machine and Electronic Control Functions
70444901
30
Dip Switch Status
The control will show the displays in Table 4
according to the DIP switch configuration. The control
will show which switches are in the ON position.
Table 4
ICM Alarm Status
This option shows the status of the ICM (Ignition
Control Module) Alarm.
To start test, control must be in the Testing Mode.
Refer to “How to Enter Testing Feature” at the
beginning of this section.
To enter, press the Start ( ) keypad. The display
will show “
” if the alarm is active for at least
one second or “
” if the alarm is not active for
one second.
To exit the test, press the Back ( ) keypad. The
control will return to the testing mode.
ICM Reset Test
The ICM Reset Test can be used to both activate the
ICM alarm signal and reset the ICM alarm. When this
test is started, the ICM reset will become active. If the
reset signal is active for a long enough period of time
(4 seconds) the ICM Lockout input will become
active. To reset the ICM, stop the ICM Reset Test and
then start the test again until the ICM Lockout input
becomes inactive (4 seconds) and then stop the ICM
Reset Test. If “
” shows on the display, ICM
Reset output is active.
External Alarm Test
This option tests whether the external alarm is
working.
To start test, control must be in the Testing Mode.
Refer to “How to Enter Testing Feature” at the
beginning of this section.
To enter, press the Start ( ) keypad. The display
will show “
” and the external alarm will
sound until the test is exited.
To exit this test, press the Back ( ) keypad. The
control will return to the testing mode.
DS8 DS7 DS6 DS5 DS4 DS3 DS2 DS1 Display
OFF OFF OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF OFF ON
OFF OFF OFF OFF OFF OFF ON OFF
OFFOFFOFFOFFOFF ON OFF OFF
OFFOFFOFFOFF ON OFF OFF OFF
OFF OFF OFF ON OFF OFF OFF OFF
OFF OFF ON OFF OFF OFF OFF OFF
OFF ON OFF OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF OFF OFF