A&D MF-50 Thermostat User Manual


 
MS-70 / MX-50 / MF-50 / ML-50 51
11.2.
11.2.11.2.
11.2. Output Format
Output FormatOutput Format
Output Format
In Case of Format omitted Temperature Data (Function Table
In Case of Format omitted Temperature Data (Function Table In Case of Format omitted Temperature Data (Function Table
In Case of Format omitted Temperature Data (Function Table 5
55
5-
--
-d 0
d 0d 0
d 0 )
) )
)
The format consists of fifteen characters except the terminator.
A polarity sign is placed before the data with the leading zeros. If the data is zero,
the plus sign is used.
The unit is or .
The position of decimal point and minimum display are changed by models.
Sign of ASCII code
0Dh Carriage return
0Ah Line feed
20h Space
Sample Mass F
Sample Mass FSample Mass F
Sample Mass Format
ormatormat
ormat (Gram Display)
(Gram Display) (Gram Display)
(Gram Display)
Positive Overload F
Positive Overload FPositive Overload F
Positive Overload Format
ormatormat
ormat (Too heavy weighing,
(Too heavy weighing, (Too heavy weighing,
(Too heavy weighing,
e
ee
e
display)
display) display)
display)
Negative Overload F
Negative Overload FNegative Overload F
Negative Overload Format
ormatormat
ormat (Too light weighing,
(Too light weighing, (Too light weighing,
(Too light weighing,
-
--
-e
ee
e
display)
display) display)
display)
Moi
MoiMoi
Moisture Content (during weighing or after weighing)
sture Content (during weighing or after weighing)sture Content (during weighing or after weighing)
sture Content (during weighing or after weighing)
In case of the MS-70
In case of the MX-50 or MF-50
In case of the ML-50
Heade
r
Polarit
y
Overload Terminato
r
Heade
r
Mass data Unit Terminato
r
Heade
r
Polarit
y
Ove
r
load Terminato
r
Heade
r
Moisture conten
t
Unit Terminato
r
Heade
r
Moisture conten
t
Unit Terminato
r
Heade
r
Moisture conten
t
Unit Terminato
r