Filter
Top Products
MS-70 / MX-50 / MF-50 / ML-50 27
8.1.2.
8.1.2.8.1.2.
8.1.2. Analyzing mode of the Automatic Mode
Analyzing mode of the Automatic ModeAnalyzing mode of the Automatic Mode
Analyzing mode of the Automatic Mode
When the change of moisture content per one minute is less than the preset value,
the measurement is automatically completed.
Range
Preset Termination
value to complete
measurement
MS-70 MX-50 MF-50 ML-50
2.00 %/min
1.00 %/min
0.50 %/min Available Available
0.20 %/min Available range range
0.10 %/min Available range
(Factory setting)
(Factory setting)
0.05 %/min range
(Factory setting)
0.02 %/min
(Factory setting)
0.01 %/min
0.005 %/min
0.002 %/min
0.001 %/min
Unavailable item
8.1.3.
8.1.3.8.1.3.
8.1.3. Analyzing mode of the Timer Mode
Analyzing mode of the Timer ModeAnalyzing mode of the Timer Mode
Analyzing mode of the Timer Mode
Sample is dried for a preset analysis time.
Drying Time 1 minute to 480 minutes.
Setting interval : 1 minute during 1 minute to 60 minutes.
5 minutes during 60 minutes to 480 minutes.
Factory setting: 10 minutes.
8.1.4.
8.1.4.8.1.4.
8.1.4. Drying Program (
Drying Program (Drying Program (
Drying Program (Heating Pattern and Drying Termperature)
Heating Pattern and Drying Termperature)Heating Pattern and Drying Termperature)
Heating Pattern and Drying Termperature)
Heating pattern
Heating patternHeating pattern
Heating pattern
Standard Mode,
Automatic Mode,
Manual Mode
Timer Mode Quick Mode
Standard drying
-
Ramp drying
-
Step drying
-
Quick drying
-
-
"Temperature 1" can be set higher than "temperature 2" in step drying.
ML-50, can select standard drying and quick drying only, does not display heating pattern.
Temperature
Temperature
Time
Temperature
Temperature
Time1
Time2
50°C
50°C
Time
Stage 1
Temperature1
Time
Temperature2
Stage 2
Temperature1
Time1
Temperature2
Stage 1
Stage 2
Time2
Temperature
200°C
3 min.