Filter
Top Products
MS-70 / MX-50 / MF-50 / ML-50 37
Select an Analysis Mode
Select an Analysis ModeSelect an Analysis Mode
Select an Analysis Mode
5. Press the SELECT key to blink a symbol, it will
blink. Select an analysis mode using the ↓ or ↑ key.
If standard mode is used, select 5td .
If automatic mode is used, select U-a .
If manual mode is used, select U-m .
Set ACCURACY for the Standard Mode
Set ACCURACY for the Standard ModeSet ACCURACY for the Standard Mode
Set ACCURACY for the Standard Mode
6. Select ACCURACY with the SELECT key.
Select MID. with the ↓ or ↑ key.
When ACCURACY is selected, HI, MID. or LO blinks.
Set the Heating Pattern
Set the Heating PatternSet the Heating Pattern
Set the Heating Pattern
7. Select drying temperature 1 with the SELECT
key. Select step drying of the heating
pattern with the PROGRAM key.
Set Drying Temperature 1
Set Drying Temperature 1Set Drying Temperature 1
Set Drying Temperature 1
8. Set 120°C to drying temperature 1 with
the ↓ or ↑ key.
Set the Time
Set the TimeSet the Time
Set the Time
9. Select time with the SELECT key.
Set 5.0 minutes with the ↓ or ↑ key.
Set Drying Temperature 2
Set Drying Temperature 2Set Drying Temperature 2
Set Drying Temperature 2
10. Select drying Temperature 2 with
the SELECT key.
Set 160°C with the ↓ or ↑ key.
Set the Preset Termination Value for
Set the Preset Termination Value for Set the Preset Termination Value for
Set the Preset Termination Value for Automatic
AutomaticAutomatic
Automatic
M
MM
Mode
odeode
ode
11. Select a preset termination value with the
SELECT key. Select 0.05 [%/min] with
the ↓ or ↑ key.
Set
Set Set
Set Measurement
Measurement Measurement
Measurement Unit
UnitUnit
Unit
12. Select measurement unit with the SELECT key.
Select moisture content (based on a wet
sample ) with the ↓ or ↑ key.
ACCURAC
Y
MID.
Standard
mode
"0."0"5
%/min
Automatic
mode
"U"-"a
0.000g
0"%
"M"O"I"S"T
"/"W
"5."0 min
2
"1"6"0°C
"1"0"5°C
1
"1"2"0°C
Standard mode
Manual mode
Automatic mode
Manual mode
ACCURACY
Preset termination value
Analysis
Measurement unit
Drying temperature 2
Drying temperature 1
Step drying
Time