A&D MF-50 Thermostat User Manual


 
MS-70 / MX-50 / MF-50 / ML-50 30
Select an Analysis Mode
Select an Analysis ModeSelect an Analysis Mode
Select an Analysis Mode
5. Press the SELECT key to select a symbol, it will
blink. Select an analysis mode using the or key.
If standard mode is used, select 5td .
If automatic mode is used, select U-a .
If timer mode is used, select U-t .
If manual mode is used, select U-m .
Set ACCURACY for the Standard Mode
Set ACCURACY for the Standard ModeSet ACCURACY for the Standard Mode
Set ACCURACY for the Standard Mode
6. Select ACCURACY with the SELECT key.
Select MID. with the or key.
When ACCURACY is selected, HI, MID. or LO blinks.
Set the Heating Patter
Set the Heating PatterSet the Heating Patter
Set the Heating Pattern
nn
n
7. Select drying temperature with the SELECT key.
Select standard drying of the heating
pattern with the PROGRAM key.
Set the Drying Temperature
Set the Drying TemperatureSet the Drying Temperature
Set the Drying Temperature
8. Set 160°C with the or key.
Set the Preset Termination Value for
Set the Preset Termination Value for Set the Preset Termination Value for
Set the Preset Termination Value for Automatic
AutomaticAutomatic
Automatic
M
MM
Mode
odeode
ode
9. Select the preset termination value with the
SELECT key.
Select 0.05 [%/min] with the or key.
Set the Analysis Time for the
Set the Analysis Time for the Set the Analysis Time for the
Set the Analysis Time for the Timer
TimerTimer
Timer
M
MM
Mode
odeode
ode
10. Select time with the
SELECT key.
Select 10.0 [min] with the or key.
Set the
Set the Set the
Set the Measurement
MeasurementMeasurement
Measurement Unit
Unit Unit
Unit
11. Select a measurement unit with the SELECT
key. Select a moisture content (based on a wet
sample ) with the or key.
Set the Minimum Scale Value of the % Display
Set the Minimum Scale Value of the % DisplaySet the Minimum Scale Value of the % Display
Set the Minimum Scale Value of the % Display
12. Select % display with the SELECT key.
Select 0.01 [%] with the or key.
0.000g
"1"0."0 min
Analysis Time
ACCURAC
Y
MID.
ACCURACY
"0."0"5
%/min
Preset termination value
Standard
mode
Automatic
mode
Timer mode
Standard mode
Manual mode
"U"-"a
0.000g
Analysis mode
0.000g
"1"6"0°C
0"%
"M"O"I"S"T
"/"W
Measurement unit
"0".0"1%
Minimum scale
value of %
display
0.000g
Standard drying
Drying temperature
Automatic mode
Timer mode
Manual mode
"1"0"5°C