A&D MF-50 Thermostat User Manual


 
MS-70 / MX-50 / MF-50 / ML-50 49
11.
11.11.
11. Connecting to a Computer
Connecting to a ComputerConnecting to a Computer
Connecting to a Computer
The analyzer can be connected to personal computer using the RS-232C interface.
The analyzer is the Data Communication Equipment type (DCE).
Use a straight-through type cable.
The MS-70 and MX-50 have the following standard accessory cable for RS-232C.
If it is necessary to connect a cable to the MF-50 and ML-50, purchase the cable of
accessory AX-MX-40. If purchasing the RS-232C cable on the market, check the
interface connections and type.
RS
RSRS
RS-
--
-232C Cable Included As A Standard Accessory Of The MS
232C Cable Included As A Standard Accessory Of The MS232C Cable Included As A Standard Accessory Of The MS
232C Cable Included As A Standard Accessory Of The MS-
--
-70 and MX
70 and MX70 and MX
70 and MX-
--
-50
5050
50
Length 2m, straight-through type for modem
The MS-70 and MX-50 have the standard accessory software "WinCT-Moisture" for
Windows. It has the function to make graphs of the change of moisture content in
realtime and has an optimum temperature search program that judges heating at an
appropriate temperature setting. Refer to "English Readme.txt" on the CD-ROM for
the details.
The MF-50 has the standard accessory software " WinCT" for Windows. It can
transmit data to a computer and can be used to monitor data and to check the
measurement condition.
There is the accessory AX-MX-42 of the software " WinCT" for Windows.
Computer side
D-Sub 9 pins
Female connector
Inch screw thread
Analyzer side
D-Sub 25 pins
Male connector
Metric screw thread