A&D MF-50 Thermostat User Manual


 
MS-70 / MX-50 / MF-50 / ML-50 40
Set t
Set tSet t
Set the
he he
he Measurement
Measurement Measurement
Measurement Unit
UnitUnit
Unit
11. Select measurement unit with the SELECT key.
Select the moisture content (based on wet
sample ) with the or key.
Set the Minimum Scale Value of the % Display
Set the Minimum Scale Value of the % DisplaySet the Minimum Scale Value of the % Display
Set the Minimum Scale Value of the % Display
12. Select the % display with the SELECT key.
Select 0.01 [%] with the or key.
Set the Minimum Scale Value of the Gram Display
Set the Minimum Scale Value of the Gram DisplaySet the Minimum Scale Value of the Gram Display
Set the Minimum Scale Value of the Gram Display
13. Select the gram display with the SELECT key.
Select 0.001 [g] with the or key.
Store the Parameters and Finish the Operation
Store the Parameters and Finish the OperationStore the Parameters and Finish the Operation
Store the Parameters and Finish the Operation
14. Press the
ENTER key to store the new parameters of
the measurement program to program number 6.
Pressing the key, the weighing mode is automatically
displayed.
When PROG 6 is recalled, the settings can be used.
To cancel the new parameters and return to the
weighing mode, press the RESET key.
0"%
"M"O"I"S"T
"/"W
"0"0"1%
"0."0"0"1g
0.000g
1