Filter
Top Products
MS-70 / MX-50 / MF-50 / ML-50 34
Store Parameters and Finish the Operation
Store Parameters and Finish the OperationStore Parameters and Finish the Operation
Store Parameters and Finish the Operation
14. Press the ENTER key to store the new parameters of
the measurement program to program number 3.
Pressing the key, the weighing mode is automatically
displayed.
When PROG 3 is recalled, the settings can be used.
To cancel the new parameters and return to the
weighing mode, press the RESET key.
Timer Mode
Timer ModeTimer Mode
Timer Mode
Refer to page 32 for Standard Mode, Automatic Mode or Manual Mode
This explanation uses the following parameters and sample displays of MX-50.
Common Items
Program number.......................................... 4 ( PROG 4 )
Analysis mode ............................................. Timer mode (Symbol: U-t )
Drying program Heating pattern ....................Ramp drying ( )
Final drying temperature.....160°C
Ramp time............................5.0 minutes
Drying time...........................10.0 minutes
Measurement unit ...............................................Moisture content
Minimum scale value during measurement.. 0.01 %
Minimum scale value of gram display.......... 0.001 g
Sample quantity........................................... Approximately 5 g
Data memory function.................................. Not used
1. Display gram unit (of the weighing mode).
Select a Program Number to Edit the Measurement Program
Select a Program Number to Edit the Measurement ProgramSelect a Program Number to Edit the Measurement Program
Select a Program Number to Edit the Measurement Program
2. Press the PROGRAM key and press the ↓ or
↑ key to select a program number.
3. Press the ENTER key to use the number.
4. The analyzer displays end and returns to the
weighing mode.
Caution If the data memory function is active, the data
memory number (MEM) is displayed in place of the
program number (PROG).
% MOIST
D /W/D
PROG 1
0.000g
PROG "4
end
PROG 4
0.000g
Program number
Final dr
y
in
g
temperature
50°C
Ramp time
Drying time
0.000g
1
6
0°C
Gram display of
weighing mode