A SERVICE OF

logo

07_ContGeneral.fm Modified: 8/16/02
Template Version 1.0
228 GL-1020 Administrator’s Guide
Unix Environment
w TCP/IP Protocol
w Microsoft Peer-to-Peer
networking
w Clients running on HP,
Sun, AIX and Linux
platforms
1 Is TCP/IP set up on the
GL-1020 controller?
Next
Step
¯
®
Configuring TCP/
IP Protocol
Settings on
page 44.
2 Did you successfully install the
TOSHIBA Unix filters?
Next
Step
¯
®
TAR File Setup on
page 154.
3 Did you successfully create
and set up the GL-1020 print
queue?
Next
Step
¯
®
Unix Queue Setup
on page 155.
4 Can you print to the GL-1020
using LPD as root?
Next
Step
¯
® Set up Unix
access for the
GL-1020
to enable
other users to print
from the Bourne
shell. Refer to your
Unix documentation
for more
information.
5 Can you ping the GL-1020
controller from your
workstation?
Next
Step
¯
® Try remote ping
from another
server. If you can
reach the
GL-1020
from that
server, check for
conflicts between
the
GL-1020 and
your current
network segment.
6 Is the LP Daemon
functioning?
Next
Step
¯
® Reload Daemon
or restart the
system.
7 Again, check the GL-1020’s IP
address and recreate print
services. Check for problems
or conflicts in the /etc/hosts
file.
End ® Contact your
TOSHIBA
authorized dealer
for support.
Resolving Network Connectivity and Printing Issues (Continued)
Network
Configuration Check... Yes No
For
Instructions,
Go To...