04_NetworkingMac.fm Modified: 8/16/02
Template Version 1.0
158 GL-1020 Administrator’s Guide
SETTING UP APPLETALK PRINTING
Considerations and Limitations
n The GL-1020 supports Macintosh printing over EtherTalk
only. TokenTalk is not supported.
n Magazine sorting and saddle stitching features are not
supported.
n Printing Microsoft Word documents that contain multiple
section breaks is not supported. The output stacking order is
incorrect and, if stapling is enabled, each section is stapled
individually.
Prerequisites
n Macintosh
w Operating System version 8.0, 8.5, 8.6, 9.0 or OS X
w LaserWriter 8 printer driver
n You can enable Macintosh printing remotely, by using
TopAccess on the administrator’s workstation, or locally,
using the copier’s LCD touch screen.
Configuring AppleTalk
Set Protocol
1 Launch your Web browser. Open TopAccess using the IP
address of the GL-1020 controller you want to configure.
(Refer to Opening TopAccess
on page 71.)
Note: You can find the IP address by using GL-DocMon.
2 Login as an Administrator.
3Click the
Administration tab.
4Click the Setup submenu.
