A SERVICE OF

logo

Open as PDF
next previous
Editing a Component’s Footprint
Multicap 9 User Guide 8-41
2. Click
Add. The dialog box changes as shown below.
3. Enter desired parameters as shown below:
•
Column — corresponds to the columns in the Select a Footprint dialog box. Click in the
field and select the desired value from the drop-down list that appears (“Footprint”, for
example).
•
Operator — select one of: =; NOT =; Contains; Starts with.
•
Value — a value you would expect to see in the selected Column ( “16”, for example).
The dialog box will resemble the following: